How To Avoid Roller Marks When Painting Walls

• 13 Jan, 2022
• by

How To Avoid Roller Marks When Painting Walls

Do you want to revamp the look of your house by painting your walls with bright colours? Most homeowners in Australia love to paint their homes on their own in order to save extra bucks.

Although painting walls is a fun activity, it requires certain skills and tricks for smooth and desired results. You can apply the fresh coat of paint using a paint roller. However, certain things can go wrong and ruin your beautiful walls. The roller can leave nasty marks or streaks behind on your walls.

That’s why it is always good to hire professional painters in Australia. They will take care of your walls and paint them using proper rolling techniques and tricks. The best part is that they use safe and sound paint to control noise in your home.

If you want to do a DIY makeover on your walls, keep the following tips in mind to avoid roller marks.

Let’s Get Started!

1. Use a High-Quality Roller

Before learning the best painting techniques, make sure you invest in high-quality equipment. Do not waste your money on throwaway rollers. Instead, buy a pro setup that can be used for years.

Make sure the tool has a good roller frame. To extend your approach towards the walls, screw a 50-inch wood handle.

Apart from this, stock up on a paint container, threaded broom handle and microfiber cloths.

2. Load the Roller with Paint

Put a screen into the bucket of paint. Load the roller cover with paint by dripping it half an inch into the paint. Make sure you roll it up and down the screen. It is good to dip it five to six times if your roller is dry. After using the roller a couple of times, you will need two to three dips.

Remember that the paint roller never leaves marks or streaks behind if it is fully loaded.

3. Try a Sweeping Stroke

After filling your roller, you can apply a fresh coat of paint to your walls. Using a sweeping stroke to get the paint even and smooth on the surface is a good technique.

Begin from the bottom and roll up while painting your walls. Make sure you stop 2-3 inches from the ceiling. Do this with gentle hands and put less pressure while sweeping a stroke.

The next step is to roll back and forth at a steady speed so that you don’t leave streaks behind. Try to coat the paint evenly on your walls.

4. Edges Should Remain Wet

It is impossible to paint all walls in one go. It is good to take a break after painting each wall. Before running the paint roller on the walls, make sure the edges are wet. This prevents from showing uneven marks on the wall.

5. Smooth the Paint

It is important to smooth the paint along the ceiling wall using a long horizontal stroke. Do not reload the roller while doing this. If you know the right trick to roll within an inch of the ceiling when rolling vertically, you can simply skip this step.

If you are running out of your budget, then look for money saving tricks on interior house painting.

6. Get As Close As Possible

Believe it or not! Paint rollers don’t fit tightly into the nooks and crannies. So, coat the paint into ceilings, floorboards and corners with a paintbrush first. However, this will leave brush marks behind.

To remove them, you need to run the roller, which isn’t fully loaded with paint and get as close as possible to the corners. Practice this trick and get tight to the corners. Apply paint next to the ceiling without spreading it on the other areas.

7. Get Rid of Lumps Before They Dry

It is obvious to end up with a few lumps in your paint. Make sure you keep the roller cover away from the flooring where it might pick up dust particles and other debris that are later spread on the walls.

Drying paint from the corner of the bucket or screen can also lead to the same issue. You can cover the bucket using a damp cloth when not using it. Also, remove the lump or dried paint immediately. Keep a damp cloth in your pocket and pick out lumps from the wall as you go.

8. Scrape Excess Paint from the Roller

You can either use a putty knife or a roller-scrapping tool to remove the excess paint from the Roller before washing it. After that, rinse it with clean water.

9. Use Less Paint

Roller marks appear on the walls when you have an excess amount of paint on your Roller. Instead of adding too much paint, use it sparingly and gently roll the tool on the same area several times.

Of course, this technique will take a bit longer, but it will leave a smooth and mark-free finish to your walls.

Conclusion

Give your walls a new look by applying a fresh coat of paint. The tricks and techniques mentioned above in the article will help you avoid roller marks when painting walls on your own. You can also hire seasoned painters in Australia if you want a professional touch on your beautiful walls.